Choosing the right battery for your Ford Ranger III (2011 and onwards) is an essential aspect of ensuring reliable vehicle performance, especially given the diverse range of engines and specifications found in this model. The Ford Ranger III, known for its durability and adaptability, is available in both petrol and diesel variants, including both 4×2 and 4×4 drive options. Since these vehicles are often used in demanding conditions, from urban commuting to off-road adventures, selecting a suitable battery is crucial not only for engine starting but also for supporting the vehicle’s electrical systems.
When it comes to the Ford Ranger III without the Start-Stop system, the type of battery required depends largely on the engine type and capacity. For the 2.5-liter petrol engine with all-wheel drive, as well as for the 2.2 TDCi diesel, both standard and 4×4 versions, a conventional lead-acid battery is recommended. The optimal battery capacity for these engines ranges from 71 to 74 Ah (ampere-hours), with a cold cranking amperage (CCA) between 670 and 750 A. This ensures that the battery has sufficient power to start the engine even in colder weather, which is particularly important for diesel units known for their higher starting current demands.
Interestingly, despite the differences in engine fuel type and drive configuration, the battery requirements for the 2.5 petrol and 2.2 TDCi engines are essentially the same. This streamlines the selection process for owners, as the same group of battery models can serve multiple versions of the Ranger III. Some of the compatible battery models (provided as examples) include Bosch S40 07, Bosch S50 07, Exide EA722, Exide EB712, Lucas LP100, Lucas LS100, Varta E38, and Varta E43. However, when choosing a battery, it is vital to pay attention not only to the technical parameters but also to the physical dimensions. In the case of Ford Ranger III, an important detail is the required reduced height of the battery, which should not exceed 175 mm. This is crucial for proper installation and to avoid any interference with the hood or other engine bay components.
For those with the most powerful diesel variant—the 3.2 TDCi 4×4—the requirements are slightly different. This engine demands a higher capacity battery, ideally within the 80 to 88 Ah range, and a cold cranking amperage between 700 and 800 A. The increased electrical demand is due to the larger engine displacement and the additional components associated with the 4×4 drivetrain. As with the other versions, conventional lead-acid batteries are suitable, but they must meet these higher performance specifications. Some suitable examples of battery models for this engine include Bosch S40 10, Bosch S50 10, Exide EA852, Exide EB802, Halfords HCB 110, Lucas LP110, Lucas LS110, Varta F17, and Varta F18. Again, it is imperative to ensure the battery height does not exceed 175 mm for compatibility with the battery compartment.
A lesser-known but interesting fact is that selecting a battery with a slightly higher capacity than the minimum recommended can be beneficial, especially if you frequently use additional electrical accessories such as winches, auxiliary lights, or sound systems. While it is not advisable to exceed the maximum specified by the manufacturer, opting for a battery on the higher end of the recommended range can enhance reliability and longevity, particularly under demanding conditions. Furthermore, modern lead-acid batteries have evolved significantly in recent years, offering better charge retention, improved vibration resistance, and longer service life—attributes that are well-matched to the rugged character of the Ford Ranger III.
In summary, when choosing a battery for your Ford Ranger III 2011 onwards, it is essential to consider not only the engine size and type but also the physical constraints within the engine bay. Always select a lead-acid battery with the appropriate capacity and cold cranking amperage, and ensure the reduced height requirement of 175 mm is met. Referring to compatible models, such as those mentioned above, will help guide your selection. Remember to double-check all specifications before purchase, as even among batteries with similar ratings, physical dimensions and terminal layouts can vary. By following these guidelines, you can ensure your Ford Ranger is ready to tackle any challenge, whether on the road or off the beaten path.
Ford Ranger in version III is produced from 2011. Below we present the specifications of batteries suitable for specific engines.
Basic parameters of batteries suitable for Ford Ranger (2011-):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Ford Ranger III – petrol engines:
- 2.5 i 4×4
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 07 | 72 Ah 680 A | 278x175x175 mm | More |
| Bosch S5 S50 07 | 74 Ah 750 A | 278x175x175 mm | More |
| Exide Excell EB712 | 71 Ah 670 A | 278x175x175 mm | More |
| Exide Premium EA722 | 72 Ah 720 A | 278x175x175 mm | More |
| Lucas Premium LP100 | 72 Ah 680 A | 278x175x175 mm | More |
| Lucas Supreme LS100 | 74 Ah 750 A | 278x175x175 mm | More |
| Varta Blue Dynamic E43 | 72 Ah 680 A | 278x175x175 mm | More |
| Varta Silver Dynamic E38 | 74 Ah 750 A | 278x175x175 mm | More |
Ford Ranger III – diesel engines:
- 2.2 TDCi
- 2.2 TDCi 4×4
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 07 | 72 Ah 680 A | 278x175x175 mm | More |
| Bosch S5 S50 07 | 74 Ah 750 A | 278x175x175 mm | More |
| Exide Excell EB712 | 71 Ah 670 A | 278x175x175 mm | More |
| Exide Premium EA722 | 72 Ah 720 A | 278x175x175 mm | More |
| Lucas Premium LP100 | 72 Ah 680 A | 278x175x175 mm | More |
| Lucas Supreme LS100 | 74 Ah 750 A | 278x175x175 mm | More |
| Varta Blue Dynamic E43 | 72 Ah 680 A | 278x175x175 mm | More |
| Varta Silver Dynamic E38 | 74 Ah 750 A | 278x175x175 mm | More |
Ford Ranger III – diesel engines:
- 3.2 TDCi 4×4
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 10 | 80 Ah 740 A | 315x175x175 mm | More |
| Bosch S5 S50 10 | 85 Ah 800 A | 315x175x175 mm | More |
| Exide Excell EB802 | 80 Ah 700 A | 315x175x175 mm | More |
| Exide Premium EA852 | 85 Ah 800 A | 315x175x175 mm | More |
| Halfords Standard HCB 110 | 80 Ah 760 A | 315x175x175 mm | More |
| Lucas Premium LP110 | 80 Ah 800 A | 317x175x175 mm | More |
| Lucas Supreme LS110 | 88 Ah 800 A | 317x175x175 mm | More |
| Varta Blue Dynamic F17 | 80 Ah 740 A | 315x175x175 mm | More |
| Varta Silver Dynamic F18 | 85 Ah 800 A | 315x175x175 mm | More |
If you’re still unsure which battery fits your Ford Ranger , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!