When selecting the right battery for the Ford Kuga II (2012 onwards), it is crucial to consider several technical aspects, primarily because this model comes with a variety of engines and some versions are equipped with the Start-Stop system while others are not. The choice of battery depends largely on whether your vehicle supports Start-Stop technology, the engine type (either petrol or diesel), and the specific battery dimensions required, particularly the height, which is a notable factor in the case of the Ford Kuga II.
For standard petrol and diesel engines without the Start-Stop system, such as the 1.6 EcoBoost 4×4, 2.0 TDCi, and 2.0 TDCi 4×4, the recommended battery capacity is typically between 71 and 74 Ah, with a cold cranking amperage ranging from 670 to 750 A. These vehicles utilize traditional lead-acid batteries, which remain a reliable and widely available choice for cars not equipped with energy recuperation systems. Several example models that would fit these requirements include the Bosch S40 07, Bosch S50 07, Exide EA722, Exide EB712, Lucas LP100, Lucas LS100, Varta E38, and Varta E43. However, it's essential to confirm the precise fit, as these are just matching examples and the final choice should always be verified against the car’s specific requirements.
A particularly important consideration for all versions of the Ford Kuga II is the battery height. In this vehicle, there is limited vertical space in the battery compartment, so an accumulator with a reduced height of approximately 175 mm is necessary. This is a detail that is sometimes overlooked but is vital to ensure a proper fit and secure installation under the hood. Using a battery with incorrect dimensions might lead not only to installation issues but also to potential electrical or safety problems.
For Ford Kuga II models equipped with the Start-Stop system, such as the 1.6 EcoBoost, 1.6 EcoBoost 4×4, and 2.0 TDCi 4×4 (110 kW), a more advanced battery technology is required—namely EFB (Enhanced Flooded Battery). EFB batteries are specially designed to withstand the increased demands of frequent engine starts and stops, as well as support the regenerative braking systems often present in vehicles with Start-Stop technology. For these versions, the recommended battery specification is a 75 Ah capacity with a 730 A cold cranking amperage. Some suitable example models include the Bosch S4 E10, Exide EL752, Halfords EFB 110, Lucas LE110, and Varta E46. Again, these are just examples of matching batteries, and you should always double-check compatibility before purchase.
It's also interesting to note that the use of EFB technology in Start-Stop vehicles enhances battery durability and performance compared to standard lead-acid types. EFB batteries are designed to handle a greater number of charge and discharge cycles, making them a more robust choice for modern vehicles that demand higher electrical performance. This is particularly beneficial in urban driving conditions, where the Start-Stop system is frequently activated.
In summary, when choosing a battery for your Ford Kuga II, pay careful attention to whether your car has a Start-Stop system, as this will determine the required battery technology—standard lead-acid for non-Start-Stop versions and EFB for Start-Stop versions. Always ensure the selected battery has the correct capacity and cold cranking amperage as specified for your engine type, and above all, confirm that the battery height does not exceed 175 mm to guarantee a perfect fit. Choosing from the provided example models can serve as a good starting point, but it’s wise to consult with a specialist or refer to your vehicle’s manual for the final confirmation. Interestingly, as automotive technology continues to evolve, we can expect even more advanced battery types to become the standard in new vehicles, such as AGM (Absorbent Glass Mat) batteries for even higher energy demands. For now, ensuring you have the right EFB or lead-acid battery will keep your Ford Kuga II running efficiently and reliably.
Ford Kuga in version II is produced from 2012. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Ford Kuga (2012-):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Ford Kuga II – petrol engines:
- 1.6 EcoBoost 4×4
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 07 | 72 Ah 680 A | 278x175x175 mm | More |
| Bosch S5 S50 07 | 74 Ah 750 A | 278x175x175 mm | More |
| Exide Excell EB712 | 71 Ah 670 A | 278x175x175 mm | More |
| Exide Premium EA722 | 72 Ah 720 A | 278x175x175 mm | More |
| Lucas Premium LP100 | 72 Ah 680 A | 278x175x175 mm | More |
| Lucas Supreme LS100 | 74 Ah 750 A | 278x175x175 mm | More |
| Varta Blue Dynamic E43 | 72 Ah 680 A | 278x175x175 mm | More |
| Varta Silver Dynamic E38 | 74 Ah 750 A | 278x175x175 mm | More |
Ford Kuga II – petrol engines:
- 1.6 EcoBoost – with Start-Stop
- 1.6 EcoBoost 4×4 – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 EFB S4 E10 | 75 Ah 730 A | 315x175x175 mm | More |
| Exide EFB EL752 | 75 Ah 730 A | 315x175x175 mm | More |
| Halfords Advanced EFB 110 | 75 Ah 730 A | 317x175x175 mm | More |
| Lucas Fusion EFB LE110 | 75 Ah 730 A | 315x175x175 mm | More |
| Varta Blue Dynamic EFB E46 | 75 Ah 730 A | 315x175x175 mm | More |
Ford Kuga II – diesel engines:
- 2.0 TDCi
- 2.0 TDCi 4×4
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 07 | 72 Ah 680 A | 278x175x175 mm | More |
| Bosch S5 S50 07 | 74 Ah 750 A | 278x175x175 mm | More |
| Exide Excell EB712 | 71 Ah 670 A | 278x175x175 mm | More |
| Exide Premium EA722 | 72 Ah 720 A | 278x175x175 mm | More |
| Lucas Premium LP100 | 72 Ah 680 A | 278x175x175 mm | More |
| Lucas Supreme LS100 | 74 Ah 750 A | 278x175x175 mm | More |
| Varta Blue Dynamic E43 | 72 Ah 680 A | 278x175x175 mm | More |
| Varta Silver Dynamic E38 | 74 Ah 750 A | 278x175x175 mm | More |
Ford Kuga II – diesel engines:
- 2.0 TDCi 4×4 (110 kW) – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 EFB S4 E10 | 75 Ah 730 A | 315x175x175 mm | More |
| Exide EFB EL752 | 75 Ah 730 A | 315x175x175 mm | More |
| Halfords Advanced EFB 110 | 75 Ah 730 A | 317x175x175 mm | More |
| Lucas Fusion EFB LE110 | 75 Ah 730 A | 315x175x175 mm | More |
| Varta Blue Dynamic EFB E46 | 75 Ah 730 A | 315x175x175 mm | More |
If you’re still unsure which battery fits your Ford Kuga , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!