When selecting a battery for the Fiat Multipla II produced between 2004 and 2010, it is crucial to consider the specific engine variant, as well as the presence or absence of the Start-Stop system. According to the data provided in the table, all listed engine versions for the Multipla II, including the 1.6 petrol, 1.6 100 16V, 1.6 16V, 1.6 16V Bipower, 1.6 16V Blupower, and the various 1.9 JTD diesel engines (105, 110, and 115 horsepower), are without the Start-Stop system. This means that standard lead-acid batteries are suitable and there is no need for specialized EFB or AGM batteries that are typically required for vehicles equipped with Start-Stop technology.
For the 1.6-liter petrol engines, including all the subvariants such as Bipower and Blupower, the recommended battery capacity ranges from a minimum of 50 Ah to a maximum of 58 Ah. The cold cranking amperage (CCA) should fall between 420 and 540 Amps. These requirements ensure that the battery will provide sufficient starting power, even in colder conditions, and can handle the typical electrical demands of the vehicle. Examples of batteries that fit these specifications include the Bosch S40 02, Bosch S50 02, Exide EA530, Exide EB500, Halfords HCB 012, Lucas LP079, Lucas LS012, Varta C22, and Varta C30. It is important to note that these are just examples of compatible batteries and other brands or models with similar technical parameters will also be suitable.
For the diesel variants, including the 1.9 JTD in all power versions, the requirements are somewhat higher due to the greater energy needed to start diesel engines, especially during cold weather. In these cases, you should look for a battery with a capacity between 70 and 78 Ah and a cold cranking amperage ranging from 640 to 780 Amps. This ensures the battery can deliver the necessary power for reliable starting and support the higher electrical load often found in diesel vehicles. Example models for these engines include Bosch S30 08, Bosch S40 08, Bosch S50 08, Exide EA770, Exide EB740, Exide EC700, Halfords HB 096, Halfords HCB 096, Lucas LP096, Lucas LS096, and Varta E11, E13, or E44. Again, these are sample compatible models, and choosing another battery meeting the same technical criteria will work just as well.
An interesting aspect of battery selection that is sometimes overlooked is the importance of matching not just the technical specifications, but also the physical size of the battery to the vehicle’s battery tray. The Multipla II generally uses standard European battery sizes, but it is always a good idea to check the dimensions of the old battery and compare them with the new one to ensure a proper fit. Additionally, it’s worth noting that batteries degrade over time, and even the best models will lose capacity in harsh conditions, such as frequent short trips or exposure to extreme temperatures. Therefore, choosing a battery from a reputable manufacturer can pay off in the long run as these tend to offer better reliability and often come with a longer warranty.
Another interesting fact is that while the Multipla II does not require the more advanced AGM or EFB batteries due to the absence of the Start-Stop system, some drivers still opt for these batteries for added durability, especially if the car is used in demanding conditions or equipped with additional electrical accessories. However, for most users, a high-quality conventional lead-acid battery will be perfectly adequate.
In summary, when selecting a battery for the Fiat Multipla II produced from 2004 to 2010, focus on the engine type and stick to the recommended capacity and CCA values. Look for reliable brands and double-check the physical size, terminal layout, and manufacturer warranty. The models listed above serve as good examples, but the key is to match the technical parameters to your specific Multipla II version. By doing so, you’ll ensure dependable starting performance and electrical system support for years to come.
Fiat Multipla in version II was produced in the years 2004 – 2010. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Fiat Multipla (2004-2010):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Fiat Multipla II – petrol engines:
- 1.6
- 1.6 100 16V
- 1.6 16V
- 1.6 16V Bipower
- 1.6 16V Blupower
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 02 | 52 Ah 470 A | 207x175x190 mm | More |
| Bosch S5 S50 02 | 54 Ah 530 A | 207x175x190 mm | More |
| Exide Excell EB500 | 50 Ah 450 A | 207x175x190 mm | More |
| Exide Premium EA530 | 53 Ah 540 A | 207x175x190 mm | More |
| Halfords Standard HCB 012 | 52 Ah 450 A | 207x175x190 mm | More |
| Lucas Premium LP079 | 50 Ah 420 A | 210x175x190 mm | More |
| Lucas Supreme LS012 | 58 Ah 520 A | 210x175x190 mm | More |
| Varta Blue Dynamic C22 | 52 Ah 470 A | 207x175x190 mm | More |
| Varta Silver Dynamic C30 | 54 Ah 530 A | 207x175x190 mm | More |
Fiat Multipla II – diesel engines:
- 1.9 JTD
- 1.9 JTD 105
- 1.9 JTD 110
- 1.9 JTD 115
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S3 S30 08 | 70 Ah 640 A | 278x175x190 mm | More |
| Bosch S4 S40 08 | 74 Ah 680 A | 278x175x190 mm | More |
| Bosch S5 S50 08 | 77 Ah 780 A | 278x175x190 mm | More |
| Exide Classic EC700 | 70 Ah 640 A | 278x175x190 mm | More |
| Exide Excell EB740 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Premium EA770 | 77 Ah 760 A | 278x175x190 mm | More |
| Halfords Essentials HB 096 | 70 Ah 640 A | 278x175x190 mm | More |
| Halfords Standard HCB 096 | 76 Ah 680 A | 278x175x190 mm | More |
| Lucas Premium LP096 | 75 Ah 680 A | 278x175x190 mm | More |
| Lucas Supreme LS096 | 78 Ah 780 A | 278x175x190 mm | More |
| Varta Black Dynamic E13 | 70 Ah 640 A | 278x175x190 mm | More |
| Varta Blue Dynamic E11 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Silver Dynamic E44 | 77 Ah 780 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Fiat Multipla , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!