Choosing the correct battery for your Mitsubishi Eclipse Cross (2018 and newer models) is crucial to ensure smooth operation, reliable starting, and optimal performance of your vehicle’s electrical systems. The selection varies depending on the specific engine configuration, presence of the Start-Stop system, and fuel type, so it’s important to pay close attention to these details when making your choice.
For the Mitsubishi Eclipse Cross equipped with the 1.5 T-MIVEC ClearTec petrol engine without the Start-Stop system, a traditional lead-acid battery is required. Recommended battery capacity is 60Ah, with cold-cranking amps (CCA) ranging from 390 to 540A. Examples of compatible battery models include Bosch S40 25, Exide EB605, Lucas LP014, and Varta D48. One important consideration here is the terminal layout—this particular vehicle may require an unconventional arrangement with the positive terminal on the left side, which is less common among standard European configurations. Additionally, typical battery mounts are labeled B13; however, for this vehicle, batteries with mounts B0 or Korean B1 should be used instead.
If your Eclipse Cross is fitted with the same 1.5 T-MIVEC ClearTec engine but features a Start-Stop system, the battery requirements differ significantly. For effective Start-Stop functionality, an Enhanced Flooded Battery (EFB) is necessary. Battery capacities in this scenario range from 60 to 65Ah with a significantly higher cold-cranking capacity between 520 and 650A, crucial for frequent starts characteristic of the Start-Stop system. Compatible battery models include Exide EL604 and Varta N65. Again, special attention should be paid to the battery mounts; for this setup, the suitable mounts are B0 and B00 rather than the more common B13.
The 1.5 T-MIVEC ClearTec 4WD variant also requires careful battery selection depending on the presence or absence of the Start-Stop system. Vehicles without Start-Stop will use the same type of battery as their two-wheel-drive counterparts—a standard lead-acid battery with a recommended capacity of 60Ah and cold-cranking amps ranging from 390 to 540A. Example compatible batteries are Bosch S40 25, Exide EB605, Lucas LP014, and Varta D48, maintaining the same caveat concerning battery polarity and mounting type (B0, Korean B1).
For the 4WD models equipped with Start-Stop technology, the battery specification tightens to precisely a 60Ah EFB with a fixed CCA of 520A, exemplified by models such as the Exide EL605. Consistency is key here, as using batteries outside these parameters might negatively impact the vehicle’s Start-Stop system and overall efficiency. Terminal orientation and battery mounting (specifically mount type B0) continue to be essential considerations.
Lastly, for owners of the Mitsubishi Eclipse Cross with the 2.2 Di-D diesel engine (109 kW) without Start-Stop technology, selecting a robust battery is important due to the higher demands diesel engines typically place on starting systems. A battery capacity between 70 and 75Ah with cold-cranking amps ranging from 540 to 630A is recommended. Suitable lead-acid battery models in this scenario include Bosch S40 27, Exide EA755, Exide EB705, and Varta E24. Like the petrol counterparts, this diesel model may require non-standard battery orientation (positive terminal on the left) and battery mount types B01 or B9, deviating from the more common B13.
As an interesting side note, choosing a battery that exceeds minimum specifications can enhance the longevity of the electrical components and ensure better performance during extreme weather conditions, especially in colder climates. Regularly checking your battery condition and maintaining the correct type is essential for the long-term reliability of your Mitsubishi Eclipse Cross, providing peace of mind on every journey.
Mitsubishi Eclipse Cross is produced from 2018. We invite you to a list of batteries matching individual engine versions.
Basic parameters of batteries suitable for Mitsubishi Eclipse Cross (2018-):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B0 |
| 1 – positive on the left side | 1 | B0 |
| 1 – positive on the left side | 1 | B01 |
| 1 – positive on the left side | 1 | Korean B1 |
| 1 – positive on the left side | 1 | B9 |
Mitsubishi Eclipse Cross – petrol engines:
- 1.5 T-MIVEC ClearTec (120 kW) – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Exide EFB EL604 | 60 Ah 520 A | 230x173x222 mm | More |
| Varta Blue Dynamic EFB N65 | 65 Ah 650 A | 232x173x225 mm | More |
For the Mitsubishi Eclipse Cross equipped with the 1.5 T-MIVEC ClearTec (120 kW) Start-Stop petrol engine, it is crucial to select a battery specifically designed to support the demands of modern start-stop technology. These engines require batteries that can withstand frequent starts, provide reliable power under varying conditions, and offer high durability. The recommended battery types for this engine are EFB (Enhanced Flooded Battery) models, which deliver improved cycling performance and are optimized for vehicles with start-stop systems.
Among the suitable options, the Exide EFB EL604 battery stands out with a capacity of 60 Ah and a cold cranking current of 520 A. Its dimensions, 230 mm in length, 173 mm in width, and 222 mm in height, ensure a good fit within the Eclipse Cross battery compartment. The battery features a standard terminal layout (layout 0) and terminal type 1, making installation straightforward. The EFB technology offers a higher level of reliability and longer service life compared to standard flooded batteries, which is important for vehicles with frequent engine restarts.
Another excellent choice is the Varta Blue Dynamic EFB N65 battery, offering a slightly higher capacity of 65 Ah and a robust starting current of 650 A. With dimensions of 232 mm length, 173 mm width, and 225 mm height, this battery also fits well within the engine bay. Like the Exide, it uses EFB technology, supports the standard terminal layout, and features B00 style mounting, ensuring compatibility with the vehicle’s electrical system. These EFB batteries ensure stable performance and are specifically engineered to meet the power requirements and cycling needs of the 1.5 T-MIVEC ClearTec engine with start-stop functionality.
Mitsubishi Eclipse Cross – petrol engines:
- 1.5 T-MIVEC ClearTec (120 kW)
- 1.5 T-MIVEC ClearTec 4WD (120 kW)
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 25 | 60 Ah 540 A | 232x173x225 mm | More |
| Exide Excell EB605 | 60 Ah 390 A | 230x173x222 mm | More |
| Lucas Premium LP014 | 60 Ah 540 A | 230x170x225 mm | More |
| Varta Blue Dynamic D48 | 60 Ah 540 A | 232x173x225 mm | More |
For the Mitsubishi Eclipse Cross powered by the 1.5 T-MIVEC ClearTec (120 kW) petrol engines without Start-Stop, both in front-wheel drive and 4WD versions, several conventional lead-acid batteries can be used. The most common battery size for these engines is the D23 case, characterized by dimensions around 230–232 mm in length, 173 mm in width, and 225 mm in height. This ensures direct compatibility with the original mounting tray and under-bonnet space in the Eclipse Cross. Batteries such as the Bosch S4 S40 25, Varta Blue Dynamic D48, and Lucas Premium LP014 all share this D23 format, offering a capacity of 60 Ah and a cold cranking current of 540 A, providing reliable starting power and electrical support for the vehicle’s systems.
It is important to note that, despite sharing similar capacities and terminal layouts (layout 1, terminal type 1), these batteries may differ in small details like the manufacturer, the specific series, or the mounting base (B0). Additionally, the Exide Excell EB605 is also suitable for these engines, featuring almost identical dimensions (230x173x222 mm) and a standard layout, but with a slightly lower cold cranking current of 390 A. This battery uses the Korean B1 mounting base, which is a minor difference from the European B0 style found on other options. Both mounting bases are typically compatible with this vehicle, but it is always best to check the current battery’s base type before purchasing, as this affects how securely the battery will fit in the tray.
All these batteries use a standard terminal polarity (layout 1, positive terminal on the right) and standard terminal posts (type 1), ensuring straightforward installation and compatibility with the vehicle’s wiring. Since Mitsubishi could have fitted different battery types even within the same engine variant, and given the minor variations in mounting and performance, it is advisable to compare the physical parameters and mounting of your existing battery when choosing a replacement. Selecting a battery with the same case size (D23), terminal arrangement, and mounting base as your current unit will help ensure proper fitment and reliable operation for your Eclipse Cross.
Mitsubishi Eclipse Cross – petrol engines:
- 1.5 T-MIVEC ClearTec 4WD (120 kW) – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Exide EFB EL605 | 60 Ah 520 A | 230x173x222 mm | More |
For the Mitsubishi Eclipse Cross equipped with the 1.5 T-MIVEC ClearTec 4WD (120 kW) Start-Stop petrol engine, choosing the right battery is essential for maintaining the vehicle’s reliability and supporting its advanced start-stop system. These engines put extra demands on the battery, requiring a product that can handle frequent engine restarts, high cycling loads, and various electrical needs. Enhanced Flooded Batteries (EFB) are specifically engineered for this purpose, offering greater endurance and performance over standard lead-acid batteries.
One of the most suitable batteries for this engine is the Exide EFB EL605. This model provides a capacity of 60 Ah and a cold cranking current of 520 A, which is well-matched to the start-stop requirements of the 1.5 T-MIVEC ClearTec 4WD. The EL605 measures 230 mm in length, 173 mm in width, and 222 mm in height, ensuring a precise fit in the Eclipse Cross battery tray. Its terminal layout is type 1 (positive on the right), with standard post terminals and a B0 mounting base, which corresponds to the factory specifications found in this Mitsubishi’s engine bay.
The EFB technology in the Exide EL605 is particularly important for start-stop engines, as it allows the battery to recover quickly after each start and withstand repeated cycling without significant loss of performance. This ensures consistent starting power, even in demanding conditions, and supports all onboard electrical systems. When replacing the battery in your 1.5 T-MIVEC ClearTec 4WD Eclipse Cross, choosing an EFB type like the Exide EL605 ensures both compatibility and long-term reliability. Always verify the terminal arrangement and mounting base to match your current battery, as this guarantees a secure fit and hassle-free installation.
Mitsubishi Eclipse Cross – diesel engines:
- 2.2 Di-D 4WD (109 kW)
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 27 | 70 Ah 630 A | 261x175x220 mm | More |
| Exide Excell EB705 | 70 Ah 540 A | 270x173x222 mm | More |
| Exide Premium EA755 | 75 Ah 630 A | 270x173x222 mm | More |
| Varta Blue Dynamic E24 | 70 Ah 630 A | 261x175x220 mm | More |
For Mitsubishi Eclipse Cross models equipped with the 2.2 Di-D 4WD diesel engine (109 kW) without a Start-Stop system, a range of standard lead-acid (conventional) batteries are suitable. The most common compatible battery size for these diesel engines is the D26 case, which typically measures around 260–270 mm in length, 173–175 mm in width, and 220–225 mm in height. Batteries such as the Bosch S4 S40 27 and Varta Blue Dynamic E24 both fit this D26 format, offering a capacity of 70 Ah and a cold cranking current of 630 A. These batteries feature a standard terminal layout (layout 1, with the positive terminal on the right) and standard post terminals (type 1), ensuring direct compatibility with the vehicle’s original wiring and battery tray.
Additionally, other batteries with very similar dimensions are suitable for this engine, such as the Exide Premium EA755 and Exide Excell EB705. Both Exide models measure 270 mm in length, 173 mm in width, and 222 mm in height, which also places them within the D26 size standard. The EA755 offers a slightly higher capacity of 75 Ah with the same cold cranking current of 630 A as the Bosch and Varta options, while the EB705 provides 70 Ah and 540 A. All these batteries share the same terminal arrangement (layout 1, type 1) and are designed for standard mounting, though the Exide models use a B9 mounting base instead of B01 as seen in Bosch and Varta. Both mounting bases are commonly found in this vehicle segment and are generally interchangeable, but it is always best to check the mounting style of your current battery to ensure a secure fit.
Because Mitsubishi may have fitted different batteries in various versions of the Eclipse Cross 2.2 Di-D, or because mounting base types (B01 and B9) can both be used, it is recommended to compare the size, terminal layout, and mounting base of your current battery before choosing a replacement. While all of these batteries fit the D26 case and provide sufficient starting power for the diesel engine, ensuring that the mounting and terminals match your vehicle will guarantee a straightforward installation and reliable operation.
If you’re still unsure which battery fits your Mitsubishi Eclipse Cross , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!