When selecting a battery for the Mitsubishi L200 III produced between 1996 and 2006, it is essential to consider several technical factors that ensure proper fitment, reliability, and performance. The L200 III is available with a range of petrol and diesel engines, including the 2.0 petrol, 2.4 4WD petrol, and several diesel variants such as the 2.5 D, 2.5 TD, 2.5 TD AWD, and 2.8 D 4WD. Each of these engine types may require distinct battery specifications, which are crucial for optimal vehicle functioning, especially under demanding conditions often encountered by pickup trucks like the L200.
For the 2.0 petrol engine without Start-Stop technology, the recommended battery capacity is 60 Ah (ampere-hours), with a cold cranking amperage (CCA) ranging from 390 to 540 A (amperes). This engine is most compatible with classic lead-acid batteries, which offer reliable performance and are widely available. When choosing a battery for this engine, you might consider examples such as Bosch S40 25, Exide EB605, Lucas LP014, or Varta D48, though these are only some of the suitable models. It is important to pay close attention to the battery’s terminal layout, as some L200 III models require a non-standard configuration with the positive terminal on the left side. Additionally, the battery should be compatible with specific mounting types, namely B0 or Korean B1, which differ from the more common B13 mounting used in many other vehicles.
Moving to the 2.4 4WD petrol engine, also without Start-Stop, the optimal battery capacity increases to between 70 and 75 Ah, with a higher CCA ranging from 540 to 630 A. Suitable battery technologies remain lead-acid, preferred for their durability and cost-effectiveness in vehicles that do not utilize Start-Stop systems. Example batteries that fit these criteria include the Bosch S40 27, Exide EA755, Exide EB705, and Varta E24. Once again, careful consideration must be given to the battery’s terminal configuration—positive on the left may be necessary—and to the unique mounting requirements (B01 or B9) that set the L200 III apart from many other vehicles.
For the diesel variants, such as the 2.5 D and 2.5 TD, as well as the 2.5 TD AWD and 2.8 D 4WD, the battery requirements are even more demanding, reflecting the higher starting currents needed for diesel engines. For the 2.5 D, the recommended battery capacity is 70 to 75 Ah with a CCA of 540 to 630 A, whereas the 2.5 TD, 2.5 TD AWD, and 2.8 D 4WD require larger batteries ranging from 95 to 100 Ah and a CCA from 720 to 830 A. Lead-acid batteries remain the standard for these engines, offering the high cranking power necessary to start diesel engines reliably, especially in cold weather. Example models for these tougher applications include Bosch S40 29, Exide EA955, Exide EB955, Lucas LS250, and Varta G8. As with the petrol engines, the terminal layout and mounting type are critical; the requirement for left-side positive terminals and less common mounting formats such as B01, B1, or Korean B1 is particularly pronounced in these diesel models.
One interesting fact about batteries for the L200 III is the prevalence of non-standard mounting types and terminal layouts. While most vehicles on the market use the B13 mounting standard, the L200’s design frequently necessitates B0, B01, B1, B9, or Korean B1, which can sometimes limit the immediate availability of suitable batteries. It is always a good idea to double-check these specifications before purchasing, as using an incorrect mounting or terminal layout can complicate installation and negatively impact safety and performance.
Another notable aspect is the absence of Start-Stop systems in all the L200 III variants from this generation, which means owners can focus on traditional lead-acid batteries without the need for enhanced AGM or EFB technologies, commonly required in newer vehicles equipped with Start-Stop. This not only simplifies the selection process but also helps keep replacement costs lower, which can be an advantage for long-term ownership.
To ensure the best possible match, always consult your vehicle’s manual and, if possible, check the original battery’s specifications. Pay close attention to capacity (Ah), cold cranking amps (CCA), terminal layout, and the exact mounting type. In summary, the Mitsubishi L200 III requires vigilant attention to details such as terminal position and mounting format, and while there are several example models that fit, always verify compatibility before purchase. By following these guidelines, you’ll ensure reliable starts and optimal battery lifespan for your Mitsubishi L200 III, whether you use it for daily driving or tough off-road work.
Mitsubishi L 200 in version III was produced in the years 1996 – 2006. Below we present the specifications of batteries suitable for specific engines.
Basic parameters of batteries suitable for Mitsubishi L 200 (1996-2006):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 1 – positive on the left side | 1 | Korean B1 |
| 1 – positive on the left side | 1 | B9 |
| 1 – positive on the left side | 1 | B01 |
| 1 – positive on the left side | 1 | B1 |
| 1 – positive on the left side | 1 | B0 |
Mitsubishi L 200 III – petrol engines:
- 2.0
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 25 | 60 Ah 540 A | 232x173x225 mm | More |
| Exide Excell EB605 | 60 Ah 390 A | 230x173x222 mm | More |
| Lucas Premium LP014 | 60 Ah 540 A | 230x170x225 mm | More |
| Varta Blue Dynamic D48 | 60 Ah 540 A | 232x173x225 mm | More |
Mitsubishi L 200 III – petrol engines:
- 2.4 4WD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 27 | 70 Ah 630 A | 261x175x220 mm | More |
| Exide Excell EB705 | 70 Ah 540 A | 270x173x222 mm | More |
| Exide Premium EA755 | 75 Ah 630 A | 270x173x222 mm | More |
| Varta Blue Dynamic E24 | 70 Ah 630 A | 261x175x220 mm | More |
Mitsubishi L 200 III – diesel engines:
- 2.5 D
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 27 | 70 Ah 630 A | 261x175x220 mm | More |
| Exide Excell EB705 | 70 Ah 540 A | 270x173x222 mm | More |
| Exide Premium EA755 | 75 Ah 630 A | 270x173x222 mm | More |
| Varta Blue Dynamic E24 | 70 Ah 630 A | 261x175x220 mm | More |
Mitsubishi L 200 III – diesel engines:
- 2.5 TD
- 2.5 TD AWD
- 2.8 D 4WD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 29 | 95 Ah 830 A | 306x173x225 mm | More |
| Exide Excell EB955 | 95 Ah 720 A | 306x173x222 mm | More |
| Exide Premium EA955 | 95 Ah 800 A | 306x173x222 mm | More |
| Lucas Supreme LS250 | 100 Ah 800 A | 302x175x225 mm | More |
| Varta Blue Dynamic G8 | 95 Ah 830 A | 306x173x225 mm | More |
If you’re still unsure which battery fits your Mitsubishi L 200 , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!