When choosing a battery for the Kia Pro Cee’d II manufactured between 2012 and 2018, it is essential to consider several key factors beyond just the physical dimensions. The car is available with a range of engines, including petrol variants like the 1.4 CVVT, 1.6 GDI, 1.6 GT, as well as diesel options such as the 1.4 CRDi and 1.6 CRDi. Another important distinction is whether the vehicle comes equipped with the Start-Stop system, as this significantly influences the required battery technology. Each engine and system configuration demands a slightly different specification, so careful attention to detail ensures both reliability and optimal performance over time.
For petrol engines without the Start-Stop system, such as the 1.4 CVVT, 1.6 GDI, and 1.6 GT, the manufacturer recommends lead-acid batteries with a capacity typically between 60 and 65 Ah, and a cold cranking amperage (CCA) ranging from 390 to 580 A. These models often require a specific mounting type, notably B0 or Korean B1, which is less common than the widely used B13 in many European cars. This distinction is crucial since standard battery offerings in most automotive stores may not always fit properly due to these unique mounting requirements. As an example, suitable battery models for these configurations include Bosch S40 24, Exide EA654, Exide EB604, Lucas LP005, or Varta D47, among others. These are only representatives of the many compatible options available on the market, but it is vital to verify the mounting style before purchase.
Diesel versions without Start-Stop, such as the 1.6 CRDi, generally share similar requirements to their petrol counterparts, utilizing lead-acid batteries within the same capacity and CCA range, and the same B0 or Korean B1 mounting type. However, the 1.4 CRDi without Start-Stop stands out by needing a slightly higher capacity battery, typically between 68 and 75 Ah, and a CCA of 540 to 630 A. For this engine, the mounting style expands to include B01, B1, or B9 types, which again are less common in the general aftermarket but are essential for proper installation and security in the engine bay. Here, example batteries would be Bosch S40 26, Exide EA754, Exide EB704, Lucas LP068, and Varta E23. Always check that the physical dimensions and terminal layout match your car’s requirements before making a purchase.
For vehicles equipped with the Start-Stop system, a more advanced battery technology is required due to the frequent engine restarts and higher electrical demands. Petrol engines with Start-Stop, like the 1.4 CVVT and 1.6 GDI, require EFB (Enhanced Flooded Battery) technology, with a recommended capacity between 70 and 75 Ah and a CCA of 650 to 760 A. EFB batteries are designed to withstand the increased cycling and partial state-of-charge operation inherent in Start-Stop systems. For these configurations, compatible battery models include the Bosch S4 E08, Exide EL700, Halfords EFB 096, Lucas LE096, Varta E45, and Varta N70. These are merely indicative examples, emphasizing the importance of selecting an EFB battery for such vehicles.
Similarly, diesel variants with Start-Stop, such as the 1.4 CRDi and 1.6 CRDi, necessitate AGM (Absorbent Glass Mat) batteries, which offer superior deep-cycle durability and support the high power demands of modern diesel engines. The optimal capacity typically ranges from 70 to 72 Ah, with a CCA between 720 and 760 A. AGM batteries are more resistant to vibration and deliver reliable performance even in colder climates, making them well suited to diesel Start-Stop systems. Some suitable battery examples in this category are Bosch S5A 08, Exide EK700, Exide EK720, Halfords AGM 096, Lucas LF096, and Varta E39. It is vital to note that using a standard lead-acid battery in a Start-Stop vehicle can lead to premature battery failure and may compromise the operation of the Start-Stop system itself.
An interesting fact is that Korean car manufacturers, including Kia, often use battery mounting types distinct from the European norm. This is why even though the battery’s electrical parameters might match, installation can be problematic if the mounting style is overlooked. Furthermore, newer battery technologies like EFB and AGM not only support Start-Stop functionality but also contribute to overall vehicle efficiency by helping reduce fuel consumption and emissions. When upgrading or replacing your battery, always consider both the electrical and physical fit, as well as the internal technology, to ensure lasting performance and reliability for your Kia Pro Cee’d II.
In summary, selecting the right battery for your Kia Pro Cee’d II depends on your engine type and whether your car is equipped with Start-Stop. Always consult your vehicle manual and double-check mounting style, capacity, and technology requirements. Using the correct battery technology—be it lead-acid, EFB, or AGM—will not only prevent issues but also help your car’s electrical systems perform as intended.
Kia Pro Cee’d in version II was produced in the years 2012 – 2018. Below we present the specifications of batteries suitable for specific engines.
Basic parameters of batteries suitable for Kia Pro Cee’d (2012-2018):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
| 0 – positive on the right side | 1 | Korean B1 |
| 0 – positive on the right side | 1 | B9 |
| 0 – positive on the right side | 1 | B0 |
| 0 – positive on the right side | 1 | B01 |
Kia Pro Cee’d II – petrol engines:
- 1.4 CVVT
- 1.6 GDI
- 1.6 GT
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 24 | 60 Ah 540 A | 232x173x225 mm | More |
| Exide Excell EB604 | 60 Ah 390 A | 230x173x222 mm | More |
| Exide Premium EA654 | 65 Ah 580 A | 230x173x222 mm | More |
| Lucas Premium LP005 | 60 Ah 540 A | 230x170x225 mm | More |
| Varta Blue Dynamic D47 | 60 Ah 540 A | 232x173x225 mm | More |
Kia Pro Cee’d II – petrol engines:
- 1.4 CVVT – with Start-Stop
- 1.6 GDI – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 EFB S4 E08 | 70 Ah 650 A | 278x175x190 mm | More |
| Exide EFB EL700 | 70 Ah 720 A | 278x175x190 mm | More |
| Halfords Advanced EFB 096 | 75 Ah 700 A | 278x175x190 mm | More |
| Lucas Fusion EFB LE096 | 70 Ah 650 A | 278x175x190 mm | More |
| Varta Blue Dynamic EFB E45 | 70 Ah 650 A | 278x175x190 mm | More |
| Varta Blue Dynamic EFB N70 | 70 Ah 760 A | 278x175x190 mm | More |
Kia Pro Cee’d II – diesel engines:
- 1.6 CRDi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 24 | 60 Ah 540 A | 232x173x225 mm | More |
| Exide Excell EB604 | 60 Ah 390 A | 230x173x222 mm | More |
| Exide Premium EA654 | 65 Ah 580 A | 230x173x222 mm | More |
| Lucas Premium LP005 | 60 Ah 540 A | 230x170x225 mm | More |
| Varta Blue Dynamic D47 | 60 Ah 540 A | 232x173x225 mm | More |
Kia Pro Cee’d II – diesel engines:
- 1.4 CRDi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 26 | 70 Ah 630 A | 261x175x220 mm | More |
| Exide Excell EB704 | 70 Ah 540 A | 270x173x222 mm | More |
| Exide Premium EA754 | 75 Ah 630 A | 270x173x222 mm | More |
| Lucas Premium LP068 | 68 Ah 540 A | 266x175x220 mm | More |
| Varta Blue Dynamic E23 | 70 Ah 630 A | 261x175x220 mm | More |
Kia Pro Cee’d II – diesel engines:
- 1.4 CRDi – with Start-Stop
- 1.6 CRDi – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S5 AGM S5A 08 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK700 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK720 | 72 Ah 760 A | 278x175x190 mm | More |
| Halfords Standard AGM 096 | 70 Ah 720 A | 278x175x190 mm | More |
| Halfords Advanced AGM 096 | 70 Ah 760 A | 278x175x190 mm | More |
| Lucas Fusion AGM LF096 | 70 Ah 760 A | 278x175x190 mm | More |
| Varta Silver Dynamic AGM E39 | 70 Ah 760 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Kia Pro Cee’d , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!