Choosing the right battery for your Chrysler Voyager III produced between 1996 and 2000 is essential for ensuring the reliability of your vehicle, especially since these models did not feature the modern Start-Stop system. When selecting a battery, there are several key factors to consider, including the engine type, fuel used, battery capacity, starting current, and the specific layout of the battery terminals. For this generation of the Chrysler Voyager, regardless of whether you have a gasoline or diesel engine, the recommended battery specifications remain quite consistent across all engine variants.
Specifically, the most suitable battery should have a capacity of 74 Ah and a starting current of 680 amperes. This applies to all engine options, such as the 2.0 i, 2.4 i, 2.4 AWD, 3.0, 3.3 i, and 3.8 i AWD gasoline engines, as well as the 2.5 TD and 2.5 TDiC AWD diesel variants. This is somewhat unusual compared to other vehicles, where diesel engines often require higher starting currents and sometimes greater capacities than their gasoline counterparts. However, Chrysler engineers opted for a unified solution, which simplifies the selection process for owners.
For all these engines, a standard lead-acid battery (lead-acid) is recommended. This type of battery is known for its reliability, ease of maintenance, and affordability. While advanced battery technologies such as AGM or EFB are not required for the Voyager III due to the lack of Start-Stop systems, sticking with a high-quality lead-acid battery from a reputable manufacturer is always advisable. Some of the example compatible battery models include the Bosch S40 09, Exide EB741, and Varta E12. It is important to note that these are only examples; other reputable brands offering batteries with equivalent specifications will also be suitable choices for your vehicle.
One of the most critical aspects to pay attention to when choosing a battery for the Chrysler Voyager III from this period is the layout of the battery terminals, specifically the position of the positive terminal. Many of these cars require a battery with the positive terminal located on the left side, which is somewhat less common in the aftermarket battery market. Using a battery with the incorrect terminal layout can make installation difficult or even impossible, and could potentially lead to electrical issues or damage to your vehicle’s wiring. For this reason, always double-check the terminal layout before making a purchase, and consult your mechanic or battery supplier if you have any doubts.
Another interesting aspect of choosing a battery for the Voyager III is that, despite the vehicle’s relatively large size and the range of available engines, the electrical demands are fairly moderate by today’s standards. This is partly because these vehicles do not have the extensive array of electronic systems and power-consuming features found in more modern cars. As a result, the standard 74 Ah battery is more than sufficient to provide reliable starts in a wide range of weather conditions, including cold winters.
When replacing your battery, it is a good opportunity to inspect the battery tray and connections for any signs of corrosion or wear. Chrysler Voyagers of this age can suffer from corroded battery terminals, which can impede current flow and reduce the effectiveness of even a brand-new battery. Regular maintenance, such as cleaning the terminals and ensuring a secure fit, can significantly extend the lifespan of your battery and help avoid annoying starting problems.
It’s also worth mentioning that while you may be tempted to install a battery with a higher capacity or greater starting current, exceeding the manufacturer’s recommendations doesn’t necessarily provide any real benefit and could, in some cases, cause stress to your vehicle’s charging system. Sticking to the recommended 74 Ah and 680 A ensures that the alternator and other electrical components remain within their intended operating conditions.
In summary, for the Chrysler Voyager III from 1996 to 2000, select a high-quality lead-acid battery with 74 Ah capacity and a starting current of 680 A. Pay particular attention to the terminal layout, opting for a battery with the positive terminal on the left if required. Example models like Bosch S40 09, Exide EB741, or Varta E12 are suitable, but equivalents from other reputable manufacturers will work just as well. With proper installation and maintenance, your Voyager’s battery should provide years of dependable service.
Chrysler Voyager in version III was produced in the years 1996 – 2000. Below we present the specifications of batteries suitable for specific engines.
Basic parameters of batteries suitable for Chrysler Voyager (1996-2000):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 1 – positive on the left side | 1 | B13 |
Chrysler Voyager III – petrol engines:
- 2.0 i
- 2.4 AWD
- 2.4 i
- 3.0
- 3.3 i
- 3.8 i AWD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 09 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Excell EB741 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Blue Dynamic E12 | 74 Ah 680 A | 278x175x190 mm | More |
Chrysler Voyager III – diesel engines:
- 2.5 TD
- 2.5 TDiC AWD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 09 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Excell EB741 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Blue Dynamic E12 | 74 Ah 680 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Chrysler Voyager , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!