Choosing the right battery for your Chrysler Voyager IV (produced between 2001 and 2007) is a crucial decision that greatly affects the reliability and performance of your vehicle, especially during cold starts and in challenging weather conditions. The Voyager IV, regardless of whether you have a petrol or diesel engine, or even an AWD variant, generally requires a battery with very specific parameters. According to the data provided, all engine versions, including the 2.4, 3.3, 3.3 AWD, 3.3 Flex-Fuel, 3.8, 3.8 AWD, 2.5 CRD, and 2.8 CRD, are designed to work optimally with a lead-acid battery of 74 Ah capacity and a cold cranking amperage of 680 A. This uniformity across the range simplifies the selection process but also means that you should pay close attention to detailed specifications to avoid compatibility issues.
One of the most important aspects to consider, which is sometimes overlooked, is the terminal layout of the battery. Many Chrysler Voyager IV models, especially those from the European market, may require a battery with the positive terminal on the left side, which is less common in the aftermarket. This detail is essential because installing a battery with the wrong pole configuration can make it impossible to connect your car’s wiring without extensive modifications. While many battery suppliers offer standard configurations, it’s worth double-checking what your specific Voyager IV requires before making a purchase.
In terms of compatible battery models, you have several good options available in the market. For example, the Bosch S40 09, Exide EB741, and Varta E12 are all suitable for the Voyager IV and meet the required specifications. It’s important to note that these are just exemplary models, and many other reputable brands produce batteries with the same technical parameters. When choosing, you might want to consider additional features such as extended warranty, resistance to deep discharges, or enhanced vibration resistance, which can further improve the durability and reliability of the battery in your vehicle.
It’s also reassuring for prospective owners or those looking to replace their battery that the Voyager IV does not utilize a Start-Stop system. Batteries for Start-Stop vehicles are typically more expensive and require advanced technologies such as AGM (Absorbent Glass Mat) or EFB (Enhanced Flooded Battery). Since your Chrysler Voyager IV is not equipped with this system, a high-quality traditional lead-acid battery is sufficient and cost-effective. This also means you won’t have to worry about the more complex diagnostic and registration processes that are sometimes necessary when replacing batteries in Start-Stop cars.
Another interesting aspect about the Chrysler Voyager IV is its demand for a relatively high cold cranking amperage (CCA) of 680 A. This requirement is particularly important for diesel engine variants such as the 2.5 CRD and 2.8 CRD, which typically need more power to start in low temperatures due to higher compression ratios. However, the fact that Chrysler recommends the same battery strength even for petrol engines indicates a conservative approach to ensure reliable starting under all conditions, which is especially beneficial for drivers in colder climates.
When you set out to buy a new battery for your Voyager IV, it’s also a good idea to check the exact dimensions of your existing battery and the available space in the engine compartment. While 74 Ah batteries usually come in standard sizes, minor variations exist between manufacturers, and a few millimeters can matter during installation. Make sure the new battery will fit both in terms of dimensions and that the terminals are accessible for proper and safe connection.
Lastly, it’s worth mentioning a fun fact: the Chrysler Voyager, especially in its fourth generation, is known for its popularity as a family vehicle across Europe and North America. Its electrical system was designed for reliability and ease of maintenance, which is reflected in the uncomplicated battery requirements and the robustness of the charging system. By carefully selecting a battery that matches the specified parameters and paying attention to the terminal layout, you can expect years of dependable service from your Voyager IV, ensuring it remains a practical and trustworthy companion for your journeys.
Chrysler Voyager in version IV was produced in the years 2001 – 2007. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Chrysler Voyager (2001-2007):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 1 – positive on the left side | 1 | B13 |
Chrysler Voyager IV – petrol engines:
- 2.4
- 3.3
- 3.3 AWD
- 3.3 Flex-Fuel
- 3.8
- 3.8 AWD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 09 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Excell EB741 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Blue Dynamic E12 | 74 Ah 680 A | 278x175x190 mm | More |
Chrysler Voyager IV – diesel engines:
- 2.5 CRD
- 2.8 CRD
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 09 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Excell EB741 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Blue Dynamic E12 | 74 Ah 680 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Chrysler Voyager , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!