Choosing the right battery for your Fiat Bravo II (198) produced between 2007 and 2014 is a crucial decision that affects the reliability and performance of your vehicle. The correct battery ensures smooth engine starts, reliable operation of electronic systems, and longevity for both the battery and the car’s electrical components. With several engine options and configurations available in the Bravo II, it’s essential to understand the specific requirements for each variant before making a selection. Below, you’ll find a detailed summary based on the provided data, along with some interesting insights into car battery technology.
For petrol engines without the Start-Stop system, such as the 1.4, 1.4 16V (140 HP), 1.4 LPG, and 1.4 T-Jet, the recommended battery should have a capacity between 50 and 58 Ah and a cold cranking amperage (CCA) ranging from 420 to 540 A. These vehicles are compatible with traditional lead-acid batteries, which are well-suited for standard ignition needs and moderate electrical demand. Some example compatible battery models include Bosch S40 02, Bosch S50 02, Exide EA530, Exide EB500, Halfords HCB 012, Lucas LP079, Lucas LS012, Varta C22, and Varta C30. It’s important to note that these are just sample models, and other batteries meeting the same specifications may also be appropriate.
If you own the 1.4 16V (140 HP) engine equipped with a Start-Stop system, the requirements become a bit more demanding. The battery capacity should be slightly higher, between 60 and 65 Ah, with a CCA from 560 to 640 A. In this case, an EFB (Enhanced Flooded Battery) type is necessary, as these batteries are designed to handle the frequent engine restarts and deeper discharge cycles typical of Start-Stop technology. Example matching models for this setup include the Bosch S4 E05, Exide EL600, Halfords EFB 027, Lucas LE027, Varta D53, and Varta N60. Choosing the right EFB battery ensures optimal performance of the Start-Stop system and prevents premature battery failure.
Diesel engine variants, such as the 1.6 D Multijet, 1.9 D Multijet, and 2.0 D Multijet, generally require batteries with higher capacities and cranking power due to their higher compression ratios and increased power demands. For the 1.6 D Multijet without Start-Stop, the ideal battery capacity ranges between 60 and 65 Ah, with a CCA of 540 to 640 A. Suitable battery models include Bosch S40 05, Bosch S50 05, Exide EA640, Exide EB620, Halfords HCB 027, Lucas LP027, Lucas LS027, Varta D15, and Varta D24 (again, these are just suggestions). For the more powerful 1.9 and 2.0 D Multijet engines, you should look for a battery with a capacity between 74 and 78 Ah and a CCA between 680 and 780 A. Example options for these engines are Bosch S40 08, Bosch S50 08, Exide EA770, Exide EB740, Halfords HCB 096, Lucas LP096, Lucas LS096, Varta E11, and Varta E44.
When selecting a battery, it’s not just about matching the technical specifications; you should also consider the brand’s reputation, warranty period, and even the climate in which you drive. Colder climates, for example, can be especially demanding on the battery, making a higher CCA rating beneficial. Another interesting fact is that modern batteries like EFB and AGM (though AGM is not required for the Fiat Bravo II, unless specified) offer improved performance and resilience, especially for vehicles with energy-intensive features like Start-Stop or numerous electronic accessories.
Remember to always double-check the battery’s physical dimensions and terminal layouts before purchasing, as incorrect sizing can cause fitment issues or even damage. It’s also a good idea to periodically check your battery’s health, as even the best batteries degrade over time, particularly if the car is used for short trips or left unused for long periods. By choosing a battery that meets or exceeds the manufacturer’s recommendations, you can ensure trouble-free operation and avoid unexpected breakdowns, keeping your Fiat Bravo II reliable for years to come.
In summary, selecting the right battery for your Fiat Bravo II mainly depends on the engine type and whether your vehicle is fitted with a Start-Stop system. Use the above specifications and sample models as a guideline, but always confirm with your vehicle’s manual and consult with a trusted parts supplier if you’re unsure. With the right battery, your Bravo II will continue to offer enjoyable and dependable driving, no matter the season or journey ahead.
Fiat Bravo in version II (198) was produced in the years 2007 – 2014. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Fiat Bravo (2007-2014):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Fiat Bravo II (198) – petrol engines:
- 1.4
- 1.4 16V (140 KM)
- 1.4 LPG
- 1.4 T-Jet
- 1.4 T-Jet
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 02 | 52 Ah 470 A | 207x175x190 mm | More |
| Bosch S5 S50 02 | 54 Ah 530 A | 207x175x190 mm | More |
| Exide Excell EB500 | 50 Ah 450 A | 207x175x190 mm | More |
| Exide Premium EA530 | 53 Ah 540 A | 207x175x190 mm | More |
| Halfords Standard HCB 012 | 52 Ah 450 A | 207x175x190 mm | More |
| Lucas Premium LP079 | 50 Ah 420 A | 210x175x190 mm | More |
| Lucas Supreme LS012 | 58 Ah 520 A | 210x175x190 mm | More |
| Varta Blue Dynamic C22 | 52 Ah 470 A | 207x175x190 mm | More |
| Varta Silver Dynamic C30 | 54 Ah 530 A | 207x175x190 mm | More |
Fiat Bravo II (198) – petrol engines:
- 1.4 16V (140 KM) – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 EFB S4 E05 | 60 Ah 560 A | 242x175x190 mm | More |
| Exide EFB EL600 | 60 Ah 640 A | 242x175x190 mm | More |
| Halfords Advanced EFB 027 | 65 Ah 600 A | 243x175x190 mm | More |
| Lucas Fusion EFB LE027 | 60 Ah 560 A | 242x175x190 mm | More |
| Varta Blue Dynamic EFB D53 | 60 Ah 560 A | 242x175x190 mm | More |
| Varta Blue Dynamic EFB N60 | 60 Ah 640 A | 242x175x190 mm | More |
Fiat Bravo II (198) – diesel engines:
- 1.6 D Multijet
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Fiat Bravo II (198) – diesel engines:
- 1.9 D Multijet
- 2.0 D Multijet
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 08 | 74 Ah 680 A | 278x175x190 mm | More |
| Bosch S5 S50 08 | 77 Ah 780 A | 278x175x190 mm | More |
| Exide Excell EB740 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Premium EA770 | 77 Ah 760 A | 278x175x190 mm | More |
| Halfords Standard HCB 096 | 76 Ah 680 A | 278x175x190 mm | More |
| Lucas Premium LP096 | 75 Ah 680 A | 278x175x190 mm | More |
| Lucas Supreme LS096 | 78 Ah 780 A | 278x175x190 mm | More |
| Varta Blue Dynamic E11 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Silver Dynamic E44 | 77 Ah 780 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Fiat Bravo , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!