Selecting the right battery for your Peugeot 2008 produced from 2013 onwards is crucial for optimal performance, reliability, and longevity of your vehicle. The battery not only powers the starter motor and ignition system but also supports all the electronic systems inside the car, which have become increasingly sophisticated in recent years. Choosing an appropriate battery requires an understanding of several factors, such as the type of engine, whether your car is equipped with the Start-Stop system, the fuel type, as well as the recommended capacity and cold cranking amps (CCA).
For petrol engines such as the 1.2 VTi and 1.6 VTi, which do not feature the Start-Stop system, the recommended battery should have a capacity in the range of 60 to 65 Ah, and the cold cranking current should be between 540 and 640 A. The preferred type for these engines is the traditional lead-acid battery, which is widely available and generally less expensive than advanced technology batteries. Some suitable examples of batteries for these engines include Bosch S40 05, Bosch S50 05, Exide EA640, Exide EB620, Halfords HCB 027, Lucas LP027, Lucas LS027, and Varta D15 or D24. It’s important to note that these are just examples of compatible models and you should always double-check the exact dimensions and terminal layout to ensure a perfect fit.
For diesel variants like the 1.4 HDi, if your Peugeot 2008 does not have the Start-Stop system, the requirements are very similar to the petrol engines. The car also takes a 60 to 65 Ah battery, with a CCA between 540 and 640 A. Standard lead-acid batteries are once again recommended, and examples of suitable models include Bosch S40 05, Bosch S50 05, Exide EA640, Exide EB620, Halfords HCB 027, Lucas LP027, Lucas LS027, as well as Varta D15 and D24. Diesel engines generally place higher demands on the battery due to increased compression ratios, but the provided range will ensure reliable starts even on cold mornings.
However, for the 1.6 HDi engine equipped with the Start-Stop system, you need a different approach. Vehicles with Start-Stop technology require batteries that can withstand frequent starts and stops, as well as deeper cycles of discharge and recharge. For these cars, AGM (Absorbent Glass Mat) batteries are a must. They offer enhanced durability, faster charging, and can better handle the demands of modern electrical systems. For the 1.6 HDi Start-Stop variant, batteries with 70 to 72 Ah capacity and 720 to 760 A CCA are recommended. Some fitting examples are Bosch S5A 08, Exide EK700, Exide EK720, Halfords AGM 096, Lucas LF096, and Varta E39. These batteries not only ensure proper functioning of the Start-Stop system but also support all the auxiliary electronics that might be in use while the engine is off at traffic lights.
It is worth mentioning that using the wrong battery type, especially in Start-Stop vehicles, can lead to a shorter battery lifespan, malfunctioning of the Start-Stop feature, or even potential damage to the car’s sensitive electronics. Whenever you replace your battery, make sure it matches not only the size and terminal position but also the technical requirements set by the vehicle manufacturer. Nowadays, many modern cars, including the Peugeot 2008, require the battery to be registered (coded) in the car’s system after replacement, to ensure the alternator charges the new battery correctly and to prevent warning lights from appearing on the dashboard.
A fascinating aspect of AGM batteries is their ability to function efficiently at steeper angles, making them ideal for vehicles that might experience more dynamic driving conditions. Furthermore, they are sealed and maintenance-free, so you don’t have to worry about topping up the electrolyte. This is a significant advantage for drivers seeking hassle-free ownership. When choosing your next battery, always opt for reputable brands and check the production date, since batteries lose capacity over time even when not in use. In summary, the choice of battery for your Peugeot 2008 should be based on your engine type, the presence of Start-Stop technology, and the technical specifications outlined above, with the provided models serving as examples of what fits best for each configuration.
Peugeot 2008 is produced from 2013. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Peugeot 2008 (2013-):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Peugeot 2008 – petrol engines:
- 1.2 VTi
- 1.6 VTi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot 2008 – diesel engines:
- 1.4 HDi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot 2008 – diesel engines:
- 1.6 HDi – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S5 AGM S5A 08 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK700 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK720 | 72 Ah 760 A | 278x175x190 mm | More |
| Halfords Standard AGM 096 | 70 Ah 720 A | 278x175x190 mm | More |
| Halfords Advanced AGM 096 | 70 Ah 760 A | 278x175x190 mm | More |
| Lucas Fusion AGM LF096 | 70 Ah 760 A | 278x175x190 mm | More |
| Varta Silver Dynamic AGM E39 | 70 Ah 760 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Peugeot 2008 , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!