When it comes to choosing the right battery for the Peugeot 407 SW produced between 2004 and 2011, several important factors must be considered to ensure reliable starting, long lifespan, and compatibility with the vehicle’s electrical system. The Peugeot 407 SW was offered with a variety of petrol and diesel engines, each with different power requirements and, as a result, different specifications for the battery. Understanding these requirements is the key to making the right choice.
For petrol engines, which include variants such as the 1.8, 1.8 16V, 2.0, 2.0 16V, 2.0 Bioflex, 2.2, 2.2 16V, and the more powerful 3.0 version, the recommended battery capacity typically falls within the range of 60 to 65 ampere-hours (Ah). These engines generally do not feature the Start-Stop system, which means they do not require the enhanced cyclic durability offered by AGM (Absorbent Glass Mat) or EFB (Enhanced Flooded Battery) types. Instead, a high-quality lead-acid battery is sufficient for reliable performance. The recommended cold cranking amps (CCA), which indicate the battery’s ability to start the engine in cold conditions, should be between 540 and 640 amps. Some commonly suggested, compatible battery models for these engines include Bosch S40 05, Bosch S50 05, Exide EA640, Exide EB620, Halfords HCB 027, Lucas LP027, Lucas LS027, Varta D15, and Varta D24. Of course, these are just examples, and it is always worth checking the precise dimensions and terminal layout to ensure a perfect fit in the battery compartment.
On the other hand, Peugeot 407 SW diesel variants, specifically the 1.6 HDi 110, also use batteries with similar capacities and CCA ratings as their petrol counterparts, which makes the process of selection relatively straightforward for these models. However, for more powerful diesel engines such as the 2.0 HDi, 2.2 HDi, and 2.7 HDi, the requirements are noticeably higher. These engines call for batteries with a capacity between 74 and 78 Ah and a much higher cold cranking current, ranging from 680 to 780 amps. This is due to the higher compression ratios and the extra energy needed to turn over diesel engines, especially in cold weather. For these diesel models, you may consider compatible examples such as Bosch S40 08, Bosch S50 08, Exide EA770, Exide EB740, Halfords HCB 096, Lucas LP096, Lucas LS096, Varta E11, and Varta E44. Again, these are representative models, and it is important to make sure that the chosen battery matches the size and terminal configuration required by your specific Peugeot 407 SW.
It is also worth noting that none of the listed engine variants for this generation of Peugeot 407 SW are equipped with a Start-Stop system. This is significant because cars with Start-Stop technology require batteries with much greater resilience to frequent charge and discharge cycles, such as AGM or EFB types. Since the 407 SW does not use this system, a conventional high-quality lead-acid battery will serve its purpose very well, making replacement simpler and often more affordable.
When selecting a battery, in addition to capacity and starting power, it is crucial to check the battery’s dimensions and terminal placement. Even if a battery has the correct electrical specifications, it must fit securely in the battery tray and connect properly to the car’s wiring. Most of the compatible batteries mentioned are standardized in terms of size for European vehicles, but it is always wise to double-check these parameters.
A lesser-known but interesting fact is that replacing a battery with one of a slightly higher capacity and CCA than the minimum specified can sometimes offer benefits, such as improved performance in harsh winter conditions and slightly longer service life, provided the vehicle’s alternator can handle the extra capacity. However, it is not advisable to exceed recommendations by a wide margin, as overly large batteries may not fit properly or could strain the charging system.
Lastly, it is a good practice to periodically check your battery’s health, especially during cold months, as even the best battery will eventually degrade. Investing in a high-quality battery from a reputable brand will save you trouble and ensure that your Peugeot 407 SW starts reliably for years to come. Remember, while the models listed here are compatible examples, always consult your owner’s manual and consider professional advice for the best results.
Peugeot 407 SW was produced in the years 2004 – 2011. The following table presents information about batteries that match each of the engines available on the market.
Basic parameters of batteries suitable for Peugeot 407 SW (2004-2011):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Peugeot 407 SW – petrol engines:
- 1.8
- 1.8 16V
- 2.0
- 2.0 16V
- 2.0 Bioflex
- 2.2
- 2.2 16V
- 3.0
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot 407 SW – diesel engines:
- 1.6 HDi 110
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot 407 SW – diesel engines:
- 2.0 HDi
- 2.2 HDi
- 2.7 HDi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 08 | 74 Ah 680 A | 278x175x190 mm | More |
| Bosch S5 S50 08 | 77 Ah 780 A | 278x175x190 mm | More |
| Exide Excell EB740 | 74 Ah 680 A | 278x175x190 mm | More |
| Exide Premium EA770 | 77 Ah 760 A | 278x175x190 mm | More |
| Halfords Standard HCB 096 | 76 Ah 680 A | 278x175x190 mm | More |
| Lucas Premium LP096 | 75 Ah 680 A | 278x175x190 mm | More |
| Lucas Supreme LS096 | 78 Ah 780 A | 278x175x190 mm | More |
| Varta Blue Dynamic E11 | 74 Ah 680 A | 278x175x190 mm | More |
| Varta Silver Dynamic E44 | 77 Ah 780 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Peugeot 407 SW , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!