Choosing the right battery for your Peugeot Partner II Tepee, produced from 2008 onwards, is an important decision that can significantly influence the reliability, efficiency, and comfort of your vehicle. The process requires a careful consideration of several parameters, such as engine type, the presence or absence of the Start-Stop system, fuel type, and the technical specifications of the battery itself. If you are a Peugeot Partner II Tepee owner or are simply interested in the specific battery requirements of this popular French van, this overview will help clarify your options and guide your selection.
One of the primary factors influencing your battery choice is the engine variant your vehicle has. For the standard 1.6-liter petrol engine without the Start-Stop system, the most suitable batteries should have a capacity ranging from 50 to 58 Ah and a cold cranking amperage (CCA) between 420 and 540 A. The recommended battery technology in this case is the traditional lead-acid type, which is widely available and offers a reliable performance for standard petrol engines without the additional demands of Start-Stop technology. Some examples of compatible battery models for this engine configuration include Bosch S40 02, Bosch S50 02, Exide EA530, Exide EB500, Halfords HCB 012, Lucas LP079, Lucas LS012, as well as Varta C22 and Varta C30. These are only sample models that match the required technical parameters and should serve as a guideline when choosing the right battery for your car.
If your Peugeot Partner II Tepee is equipped with the more advanced 1.6 VTi petrol engine, also without the Start-Stop system, the battery requirements are slightly higher. Here, it's best to look for a battery with a capacity between 60 and 65 Ah and a CCA of 540 to 640 A. Again, a traditional lead-acid battery is sufficient for this setup. Some suitable sample models for this engine include Bosch S40 05, Bosch S50 05, Exide EA640, Exide EB620, Halfords HCB 027, Lucas LP027, Lucas LS027, Varta D15, and Varta D24. These batteries provide the necessary power reserves for the slightly more demanding VTi engine, ensuring a reliable start even in colder weather conditions.
For those driving the diesel 1.6 HDi variant, battery needs closely mirror those of the 1.6 VTi petrol version. A battery with a 60–65 Ah capacity and 540–640 A CCA, based on lead-acid technology, is recommended. The same example batteries mentioned for the 1.6 VTi engine will be well-suited also for the 1.6 HDi diesel engine. Diesel engines, in general, require slightly more power to start, especially in cold climates, so ensuring that your chosen battery falls within these specifications is crucial for trouble-free operation.
The situation changes significantly if you own the 1.6 e-HDi diesel engine, which is equipped with the Start-Stop system. Here, the demands on the battery are much greater due to the frequent engine restarts imposed by this fuel-saving technology. For this configuration, you should select an AGM (Absorbent Glass Mat) battery, renowned for its enhanced durability, resistance to deep cycling, and superior charge acceptance. The ideal capacity for these models is between 70 and 72 Ah, with a CCA of 720–760 A. Example compatible AGM batteries include Bosch S5A 08, Exide EK700, Exide EK720, Halfords AGM 096, Lucas LF096, and Varta E39. AGM batteries are a technological leap forward, providing superior performance and longevity compared to traditional lead-acid types, particularly in vehicles with advanced electrical systems like Start-Stop.
It is interesting to note that choosing the correct battery does not only impact starting reliability but also affects the operation of comfort features and electronic safety systems, which are increasingly present in modern vehicles. Overlooked battery parameters or opting for an underpowered battery can lead to a host of electrical issues, inconvenience, and even premature battery failure. Additionally, while AGM batteries may come at a higher initial cost, their longer service life and robustness often make them a more economical choice for Start-Stop vehicles in the long run.
In summary, always refer to your vehicle’s manual and check the original battery specifications before purchasing a new one. While the recommended models listed above serve as excellent examples, local climate, driving style, and the presence of additional electrical equipment may also influence your final choice. Remember, a properly matched battery not only ensures smooth operation but can also help you avoid unnecessary headaches and expenses down the road.
Peugeot Partner in version II Tepee is produced from 2008. Below we present the specifications of batteries suitable for specific engines.
Basic parameters of batteries suitable for Peugeot Partner (2008-):
| Layout | Terminal types | Base hold-down |
|---|---|---|
| 0 – positive on the right side | 1 | B13 |
Peugeot Partner II Tepee – petrol engines:
- 1.6
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 02 | 52 Ah 470 A | 207x175x190 mm | More |
| Bosch S5 S50 02 | 54 Ah 530 A | 207x175x190 mm | More |
| Exide Excell EB500 | 50 Ah 450 A | 207x175x190 mm | More |
| Exide Premium EA530 | 53 Ah 540 A | 207x175x190 mm | More |
| Halfords Standard HCB 012 | 52 Ah 450 A | 207x175x190 mm | More |
| Lucas Premium LP079 | 50 Ah 420 A | 210x175x190 mm | More |
| Lucas Supreme LS012 | 58 Ah 520 A | 210x175x190 mm | More |
| Varta Blue Dynamic C22 | 52 Ah 470 A | 207x175x190 mm | More |
| Varta Silver Dynamic C30 | 54 Ah 530 A | 207x175x190 mm | More |
Peugeot Partner II Tepee – petrol engines:
- 1.6 VTi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot Partner II Tepee – diesel engines:
- 1.6 HDi
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S4 S40 05 | 60 Ah 540 A | 242x175x190 mm | More |
| Bosch S5 S50 05 | 63 Ah 610 A | 242x175x190 mm | More |
| Exide Excell EB620 | 62 Ah 540 A | 242x175x190 mm | More |
| Exide Premium EA640 | 64 Ah 640 A | 242x175x190 mm | More |
| Halfords Standard HCB 027 | 62 Ah 550 A | 242x175x190 mm | More |
| Lucas Premium LP027 | 60 Ah 540 A | 243x175x190 mm | More |
| Lucas Supreme LS027 | 65 Ah 640 A | 242x175x190 mm | More |
| Varta Blue Dynamic D24 | 60 Ah 540 A | 242x175x190 mm | More |
| Varta Silver Dynamic D15 | 63 Ah 610 A | 242x175x190 mm | More |
Peugeot Partner II Tepee – diesel engines:
- 1.6 e-HDi – with Start-Stop
| Model | Capacity and CCA | Dimensions (LxWxH) | Price |
|---|---|---|---|
| Bosch S5 AGM S5A 08 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK700 | 70 Ah 760 A | 278x175x190 mm | More |
| Exide AGM EK720 | 72 Ah 760 A | 278x175x190 mm | More |
| Halfords Standard AGM 096 | 70 Ah 720 A | 278x175x190 mm | More |
| Halfords Advanced AGM 096 | 70 Ah 760 A | 278x175x190 mm | More |
| Lucas Fusion AGM LF096 | 70 Ah 760 A | 278x175x190 mm | More |
| Varta Silver Dynamic AGM E39 | 70 Ah 760 A | 278x175x190 mm | More |
If you’re still unsure which battery fits your Peugeot Partner , or if you want to help others in their selection, please send us a photo of your current battery in the comment section at the bottom of the page. You can also send the picture to contact@whatbattery.co.uk (we will place it in the comments to also help other users). Be sure to specify the car model, year, type, as well as the engine capacity and power. We’ll do our best to assist you!